(04-20-2020, 10:07 AM)Wathik Wrote: Hi there, 

I see that this question has been asked a number of times before but I'm none the wiser. . . I've created the kml, uploaded as per https://www.vzfit.com/explorer/upload_kml/ but still can't see my new route in the Created folder. What am I doing wrong? Tried to attach to this post but it says the type of file attached is not allowed. 

Cheers

Wathik

(04-20-2020, 06:42 PM)Snowpelt Wrote:

(04-20-2020, 10:07 AM)Wathik Wrote: Hi there, 

I see that this question has been asked a number of times before but I'm none the wiser. . . I've created the kml, uploaded as per https://www.vzfit.com/explorer/upload_kml/ but still can't see my new route in the Created folder. What am I doing wrong? Tried to attach to this post but it says the type of file attached is not allowed. 

Cheers

Wathik

If you can share a link to the Google My Maps, enable sharing, I can take a look.  Usually it means the export was not done properly.  You only want to export the Layer your directions are on.

(04-20-2020, 08:01 PM)Wathik Wrote:

(04-20-2020, 06:42 PM)Snowpelt Wrote:

(04-20-2020, 10:07 AM)Wathik Wrote: Hi there, 

I see that this question has been asked a number of times before but I'm none the wiser. . . I've created the kml, uploaded as per https://www.vzfit.com/explorer/upload_kml/ but still can't see my new route in the Created folder. What am I doing wrong? Tried to attach to this post but it says the type of file attached is not allowed. 

Cheers

Wathik

If you can share a link to the Google My Maps, enable sharing, I can take a look.  Usually it means the export was not done properly.  You only want to export the Layer your directions are on.

Hi - here's the link: https://drive.google.com/open?id=1o1sJvTaLQcrTvEYZXyf9NPsEtpX_LBS6&usp=sharing

(04-21-2020, 02:36 AM)Snowpelt Wrote:

(04-20-2020, 08:01 PM)Wathik Wrote:

(04-20-2020, 06:42 PM)Snowpelt Wrote:

(04-20-2020, 10:07 AM)Wathik Wrote: Hi there, 

I see that this question has been asked a number of times before but I'm none the wiser. . . I've created the kml, uploaded as per https://www.vzfit.com/explorer/upload_kml/ but still can't see my new route in the Created folder. What am I doing wrong? Tried to attach to this post but it says the type of file attached is not allowed. 

Cheers

Wathik

If you can share a link to the Google My Maps, enable sharing, I can take a look.  Usually it means the export was not done properly.  You only want to export the Layer your directions are on.

Hi - here's the link: https://drive.google.com/open?id=1o1sJvTaLQcrTvEYZXyf9NPsEtpX_LBS6&usp=sharing

Exported and tried it with no real problems. It does appear to start inside a building so once I drove out onto the road I had to switch rendering views a couple times to get myself to be on ground level.  

When exporting make sure it looks like this:

(04-21-2020, 03:14 AM)Wathik Wrote:

(04-21-2020, 02:36 AM)Snowpelt Wrote:

(04-20-2020, 08:01 PM)Wathik Wrote:

(04-20-2020, 06:42 PM)Snowpelt Wrote:

(04-20-2020, 10:07 AM)Wathik Wrote: Hi there, 

I see that this question has been asked a number of times before but I'm none the wiser. . . I've created the kml, uploaded as per https://www.vzfit.com/explorer/upload_kml/ but still can't see my new route in the Created folder. What am I doing wrong? Tried to attach to this post but it says the type of file attached is not allowed. 

Cheers

Wathik

If you can share a link to the Google My Maps, enable sharing, I can take a look.  Usually it means the export was not done properly.  You only want to export the Layer your directions are on.

Hi - here's the link: https://drive.google.com/open?id=1o1sJvTaLQcrTvEYZXyf9NPsEtpX_LBS6&usp=sharing

Exported and tried it with no real problems. It does appear to start inside a building so once I drove out onto the road I had to switch rendering views a couple times to get myself to be on ground level.  

When exporting make sure it looks like this:

Hmmm. Still not appearing in my Created folder. Could it be a Mac OS vs Windows issue? Is it possible to export it to my account from your side?

(04-21-2020, 06:34 PM)Snowpelt Wrote:

(04-21-2020, 03:14 AM)Wathik Wrote:

(04-21-2020, 02:36 AM)Snowpelt Wrote:

(04-20-2020, 08:01 PM)Wathik Wrote:

(04-20-2020, 06:42 PM)Snowpelt Wrote: If you can share a link to the Google My Maps, enable sharing, I can take a look.  Usually it means the export was not done properly.  You only want to export the Layer your directions are on.

Hi - here's the link: https://drive.google.com/open?id=1o1sJvTaLQcrTvEYZXyf9NPsEtpX_LBS6&usp=sharing

Exported and tried it with no real problems. It does appear to start inside a building so once I drove out onto the road I had to switch rendering views a couple times to get myself to be on ground level.  

When exporting make sure it looks like this:

Hmmm. Still not appearing in my Created folder. Could it be a Mac OS vs Windows issue? Is it possible to export it to my account from your side?

Here's a link to the KML file I exported that worked. Try using that one.  Are you getting the successful uploaded message on your VZfit profile after you upload?  KML LINK

(04-22-2020, 02:35 PM)Shon_T Wrote: Looks like an awesome route. When you finish it, please share it!