VZfit Explorer Feedback

[Snowpelt]

Hi Kuzoka,

I'm guessing that you are not pedaling forward when the games ask you to PEDAL FORWARD TO CONNECT BIKE.  That's when they determine what direction is forward.  If the games think your forward pedaling is reverse, then you will go backward in some of the games like Tank and Racecar and Explorer.  Try restarting the games and be careful to pedal forward when connecting.

It also sounds like sometimes the Sensor connects but your virtual bike and spins aren't moving at all.  Make sure your Sensor it mounted on the crank so that it's flat face is vertical.  Also note if you connect the Sensor but then don't pedal for 3 minutes, the Sensor will fall asleep and need to be rotated to wake up.  That can cause a few second delay in movement again.

If you still aren't moving, but you can get the Sensor green light to flash in your hand, then try rotating it in your hand when the game asks you to PEDAL FORWARD to see if it moves then.  If that works but it doesn't on the bike, please let us know!

---

The sensor is definitely blinking green when rotated but is not registering. I have cycled for a few minutes after repositioning the sensor on the crank but it is still registering.
The controller works fine.

---

I meant  the sensor still not registering after repositioning.

Hey Kuzoka,

Can you confirm that the sensor is not working in both Apps?  No need to re-pair the controller as they both connect independently to the headset. Also,  if you have not already, can you try removing the battery for 30 seconds then putting it back in and trying again?  

Sorry for the inconvenience, the sensor is usually connects very easily. Let me know how it goes.

Thanks!